When it comes to knowledge of Texas of the elevator, I believe we no stranger in our daily life it can be seen everywhere, but the use of the elevator for Texas will inevitably be a corresponding disassembly work, in this order to further promote their understanding of the user , related professional and technical personnel dismantling its Texas elevator construction program are summarized as follows: 1, construction workers must wear safety after entering the field to take a good, first check whether the shaft pit flammable, if immediately clear. Then enter the room to check the elevator power is off, check the tightness of the brake before entering the hoistway. 2, Texas elevator dismantled from the top down, the elevator hoistway transported along the track to the bottom. The layers landing door with additional lift transport to the bottom, each layer immediately dismantle blocking the doorway. 3, in the construction site of the well and the room is strictly prohibited cross-operation, non-altitude parabolic, perform according to specifications when required electricity, can not Luanla wires. Needed to be a full-time electrician wiring, elevator governor must be dismantled in order to lift all been dismantled after. 4. Working in the construction of the Texas elevator parts removed gently as possible, so as not to damage the inner hug facilities and ground, construction workers do not get a non-construction area stay. 5, according to the project site conditions, our construction of the 24-story elevator 3 days, 15 layer below the elevator two days. 

palabras clave: Texas elevator, Texas elevator manufacturers, Texas Elevator Company,